|
|
|
#1
|
||||
|
||||
92 400E suspension setup questions
So ive got a 1992 400E and im wanting to lower it. I see pics of w124's lowered 2" plus. and on tirerack I can only find a 1.3" drop. im looking for at least a 2" drop. any sites or places that I could find such parts?
|
#2
|
||||
|
||||
http://new.arena9.com/car_images/19_big.jpg like this for example. is that lowered 1.3"?
|
#3
|
||||
|
||||
You can tell from the ridiculous amount of negative rear camber that the car in your link was lowered more than 2" even.
If you want a car that is daily driveable and handles well, then my recc would be to use the available H&R kit and reduce your rear spring pad thickness to level it out. You will still have excessive tire wear unless the camber is corrected, but not just a few thou miles like that example!
__________________
Dean Albrecht "Lead, follow, or better yet, get out of the way!"E500 owners motto |
#4
|
||||
|
||||
Where could I find some pics of a W124 that has the H&R set? What did that red W124 use for suspension do you think?
|
#5
|
||||
|
||||
My signature pix has my W124.036 lowered on H&Rsprings with #1 pads and Koni adjustables on the fronts, stock SLS on the rear....if you care to look.
|
Bookmarks |
|
|