Need help with E500 part numbers

[WDV]

Hi! I was wondering if anybody would have the part numbers for the following parts, specifically the rubber grommet on the firewall where the engine wiring harness goes through, and the throttle link between the Electronic Throttle Actuator and the throttle cable assembly (this is the one that is vertical and looks like it is made of stamped sheetmetal). The rubber grommet is missing and I wouldn't have known that there is suppose to be one on there until I saw some website on the proper routing of the wiring harness. On the the throttle linkage, it seems that one of the rivets is worn and cause the linkage to bend a little bit.

On another note, check the rubber buffers? on the braided part of your fuel supply and return lines. I found that mine were in the wrong position and the braided fuel line was starting to rub on one of the AC lines.

Thanks in advance.

WDV

[gsxr]

WDV,

1) You might want to get a copy of the EPC (dealer part catlog - like electronic microfiche on CD-ROM.)

2) You are missing the plastic, 4-hole grommet for the wire harnesses and heater hose? That's strange!

3) The flat vertical throttle connection rod, behind the engine, is 001-070-63-75, and will probably need to come from Germany. I just ordered this for my car. The center rivet should allow a bit of "sliding" movement, but should not bend.

i have epc if any one need information, send me an email
Ray
mercedessd@cox.net