Second time today, I have heard the name "speeduino".

Can somebody share their experiences with it? I have half a dozen arduino boards within arms reach of where I am sitting.

-CTH

__________________
- cth350@gmail.com
http://www.111lakeside.com/

I follow the Youtube channel. Not much happening there.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff

I have it on my m102 w124. Early megasquirt vibes with more features. Lots of info available.
Also there are different boards with different options.
If you have time then i would recommend to build it - good learning experience. Software is tunerstudio. But its more diy than plug and play.

__________________
MB 300CE Turbo '88
MB 300E '86

Thanks, I have pickup a board from someone that pulled it. I have to confirm it actually works.

-cth