|
|
|
|
|
#1
09-01-2002, 12:24 AM
|
|||
|
|||
|
BergWerks 1st gear?
Has anyone purchased (and installed) the Bergwerks 1st gear start? What has been yoiur experience, both in the installation and the performance?
Tom 
|
|
#3
09-04-2002, 05:59 AM
|
|||
|
|||
|
I installed my kit about 4 days ago. Instructions are really clear and everything you need is included.
I can see why the factory start is second gear, it is very easy to induce wheelspin in my Euro 560 if you push the throttle quickly. I am looking to wire the overide for 1st gear start into the sport/economy switch on the gear selector, the supplied switch mounts in the coin tray and is obviously not a factory switch. An excellent addition however with the shift parameters adjustable. I programmed mine for a slightly later 1-2 upshift and a slightly earlier 2-1 downshift. Matt.
|
|
#5
09-05-2002, 09:14 AM
|
|||
|
|||
|
Hi Neil, not unless you use the B switch to active first gear start which works in either standard or economy modes.
Cheers Matt.
|
|
#6
09-06-2002, 09:03 PM
|
|||
|
|||
|
I have just wired mine into the S/E switch on the trans and it works great. Anyone with a 2nd gear start V8 should get one of these, they are awesome.
Matt.
|
|
#7
09-08-2002, 04:59 PM
|
||||
|
||||
|
I am not familiar with the company . Where did you order it from and how much ?.
Thanks Alan
__________________
92 500E Silver 66k 82 Porsche 911SC 84K 68 Cadillac ( Gone Now ) 03 Suburban Z71 200K 85 300SD 217k From Original Owner ( Dad )
|
|
#8
09-09-2002, 01:44 AM
|
|||
|
|||
|
|
|
#9
09-10-2002, 01:11 AM
|
|||
|
|||
|
Hi all, I have a 1990 300CE twin cam 24 bla bla .......I love my car, I rang up Berg Werks today, to find out if I could get a first gear start mod. I was told the only way I can do it, is to alter the valve body, Yikes! I talked with Steve, he told me I would love it. The $300.00 bucks he quoted, is OK by me, but I need to know if anyone has this? The 1-2 switch wont work with my car, It's 1'st gear start only!
Help?
__________________
Tim 300CE 280SE 4.5 Sandals (size 11)
|
|
#10
09-13-2002, 01:22 AM
|
||||
|
||||
|
Het Neil. Can you post some pics of the new 1st gear module setup. I got off the phone with Carl at Berg, he interested in doing my car next. I had him order all the goodies.
How do you like it. Tell all PLS. Guido
__________________
500E Sold 2006 Mini Cooper S Modified,pulley,injectors,suspension 2009 E350 Sport AMG package
|
|
#11
09-18-2002, 10:25 AM
|
|||
|
|||
|
See my post at the link below regarding install, experience, and a picture.
In short- get it ! :-) neil 1988 360TE AMG 1993 500E What is the injection timing on a 84 300SD 
|
|
#12
09-19-2002, 12:29 AM
|
||||
|
||||
|
Guidos aftermath
Guidos aftermath. Heres a few parts replaced after a bakery trunk into your RR wheel
   GOT THE CAR BACK ITS AT MY SHOP. ITS ALL GOOD. GOING TO BERGWERKS IN 2 WEEKS FOR SOME GOODIES
__________________
500E Sold 2006 Mini Cooper S Modified,pulley,injectors,suspension 2009 E350 Sport AMG package
|
|
#13
09-19-2002, 03:00 AM
|
|||
|
|||
|
Bad luck dude. Any panel damage?
|
 |
| Bookmarks |
|
|
Linear Mode
