PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Mercedes-Benz Performance Paddock (http://www.peachparts.com/shopforum/mercedes-benz-performance-paddock/)
-   -   More info needed-- EVO II wheels on 1994 E420 (http://www.peachparts.com/shopforum/mercedes-benz-performance-paddock/51422-more-info-needed-evo-ii-wheels-1994-e420.html)

vanakin 11-29-2002 11:06 PM

More info needed-- EVO II wheels on 1994 E420
 
I've searched through the archives and it looks like 17" EVO II wheels will fit on the 1994 E420, can anyone confirm or deny this?

What kind of tires will I need to buy so that there is no rubbing at all?

The local MB dealer is selling four new rims for $1360, I couldn't find them on Tirerack and Bekkers is a little more expensive especially with the extra cost of shipping . Does anyone know if there are any cheaper prices than this?

I don't know much about fitting rims to cars so is there anything else I should know before I buy the rims, what are spacers, fender rolls and offset, will I need to make any modifications to the car like rolling the fenders e.t.c.

I'm expecting a harsher, stiffer ride, is there anything else I need to worry about?

Thanks for any help or advice you can give.

Jim's500E 12-16-2002 12:08 PM

Not sure which EvoIIs you are talking about...the 7.5" or 8.25" wide ones? E-mail me if you want a used set in the 8.25" width. I could also get you in a new set for $1250 too in that same size with the polished face. They need special lugs too...like $20 per rim.

I didn't notice a change in ride quality from 16s to 17s...in fact I thought it was better with the 17s but I should attribute that to the new rubber I also put on.

vanakin 12-16-2002 12:57 PM

Thanks for your post Jim,

I was told the 8.25 rims would not fit "flush" on my E420 by several mercedes shop members. I was told they would stick out.

I am interested in the 7.5 rims, but email me a price on the 8.25 rims anyway.

Jim's500E 12-16-2002 01:21 PM

7.5s are doable too, what finish you want?...you have mail. :)

MBZ190E16V 12-17-2002 04:44 AM

8.25 dont stick out. i have em on my 16v and have seen them on a E500. they look pretty good with 245/40/17s

Cardude 12-17-2002 07:04 AM

Could you please post some pics of your car with the 8.25 inch wheels installed.



Cardude

MBZ190E16V 12-17-2002 02:53 PM

http://us.f1.yahoofs.com/users/ccdfb...eU4_9A1diCo761
http://us.f1.yahoofs.com/users/ccdfb...eU4_9AAnIRDLte

these r pics of my 16v. dont have an E500 :(

Drunchik 12-20-2002 04:10 AM

u will have to do some minor fender job for 8.25 (and probably for 7.5 too depending on tires) i have 8x17s ET38 with 235/45R17 and they do stick out a bit

Cardude 12-20-2002 04:36 AM

I never got the pitures to work. vanakin did you get the answer you were looking for.



Cardude

vanakin 12-20-2002 10:34 AM

Hello Cardude,

I never got the pictures either but I did get the answer I wanted, looks like I'll be getting 7.5s whenever I decide to do it.

Since 8.25 won't fit perfectly on the E420, it's safe to assume they won't fit perfectly on a 190E right?

Thanks for the help

Cardude 12-21-2002 06:07 AM

Safe assumption! Hey lets lower that baby too. :)





Cardude,

Jim's500E 12-21-2002 09:31 AM

190E EvoII has the 8.25s on the rears...right? :confused:

MBZ190E16V 12-21-2002 11:52 PM

yup...i have 17x8.25 on my 190E 16v not Evo kit. and they fit fine

Jim's500E 12-23-2002 08:42 AM

Didn't they make the EvoII rim originally for the 201 series car? Or did the 129 SL have them on first? :)

need2speed 12-23-2002 10:33 AM

Jim, my understanding was that they were first available on the 1990 190E EVO II, next on the 500SL Special Edition and finally on the 1994 E500 Limited. The EVO II tire size was 245/40ZR17, so the rims would have to be the same 17x8.25 as the V8 cars.

http://www.mb-w201-16.de/de/Treffen/..._02_01_011.jpg


All times are GMT -4. The time now is 10:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website