Hello all,

I just got back from Dyno Day at the local Ricer shop. Here are the results:

Run 11: Max Power = 253.00 Max Torque = 271.1
Run 13: Max Power = 255.30 Max Torque = 277.6

The dyno operator had a hard time keeping the car from downshifting. These runs start at about 4k RPM in 3rd gear.

He was a little surprised by the mighty 500E. :-)

He suggested 22% loss. If my math is correct my stock 500E (K&N's) is making 326.92 at the crank. Sounds right?

Any thoughts?

Dave

PS. Someone buy this car so I can get an E55 and have Donnie put a blower on it.

PSS. on a run where the car downshifted the dyno printed POWER = 292.7 and Torque of 363.8!

Attached Thumbnails