PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Mercedes-Benz Used Parts For Sale & Wanted (http://www.peachparts.com/shopforum/mercedes-benz-used-parts-sale-wanted/)
-   -   Parting Out-2-115's,2-116's, 3-123's, 2-124's and 3-126's (http://www.peachparts.com/shopforum/mercedes-benz-used-parts-sale-wanted/123964-parting-out-2-115s-2-116s-3-123s-2-124s-3-126s.html)

nick126 01-29-2007 09:48 AM

Got any lug bolt caps?
 
For the 126?

jim16671836 01-31-2007 12:36 PM

Lug Bolt Caps
 
Sorry, I don't have any nice lug bolt caps... I think you can buy them here on this forum though... Good Luck... Jim

Diesel2theMoon 01-31-2007 07:35 PM

W126 Driver Side Power seat switch and knobs?
 
Let me know if you've got a switch FS and how much.

Cervan 02-02-2007 01:01 AM

i am looking for an w123 240d or 300d instrament cluster and a glovebox from a 1981- later 240d or 300d thankyou.

jim16671836 02-02-2007 10:57 AM

Mercedes Parts
 
Can you get the part number for your cluster off the front??? just look right below the speedometer... What color is your glovebox??? mercedes changed the texture about 1981 .... do you also need the wood and the lock??? do you know how to remove your lock and install it in another??? sorry about all the questions... Jim

Cervan 02-03-2007 04:28 AM

my glovebox color is black and i dont need the wood or lock. to remove you take off the rear door and its obvious :D, i dont know my spedo number will look at it tommarow i would also like a wood shifter/steering wheel if possible i also need a working manual transmission cruise control amp. and 4 acceptable tires and 4 acceptable used shocks.

jim16671836 02-03-2007 08:45 AM

123 Parts
 
What is your location??? Shipping costs for tires are very high... I do have some nice 14 inch tires... I have the glove box(black without wood and lock) and I might have the shocks... I will need to look.. I only have the regular steering wheel and no wood shifter.. I have sold the only cruise amp that I had from a manual car.. You might take your amp apart(the front will come off very easily) and see if there are any hot spots on the board... if there are not the amp might not be bad... If there are hot spots you might be able to have them resoldered at a radio shop or radio shack... Jim

Cervan 02-03-2007 08:28 PM

i live in Bakersfield California 93309 well i would like that steering wheel if its not as bad as mine and those tires and shocks would be nice. :D -gary

jim16671836 02-08-2007 01:05 AM

Trip East
 
When are you planning your trip East to Washington DC.... Jim

Cervan 02-12-2007 04:56 AM

over spring break about a month or two away ill be going from ca to washing ton with a passenger and returning with a passenger so i will have very little space maybie i could have the tires put on the car at a local shop.

veg_hed_300d 02-13-2007 03:06 PM

82' 300D headlight assembly. Drivers Side.
 
I was backing my truck into the driveway the other day and managed to put the corner of my trucks rear bumper straight into my Benz's headlight.
The good news is that i did not do any body damage, just pushed the headlight assembly back a bit and cracked it, and the lense.

So all i really need is the assembly that the headlight and fog light fit into and the clear plastic cover.

I don't even need the headlight or foglight or the corner light. You got something like this in decent shape?

adiaw83 02-13-2007 04:26 PM

exhaust
 
Do you have the back half of an exhaust for a 1983 300SD? I need everything after the down pipe. The 2 kidney parts and the main muffler at the back. Thanks.

adiaw83 02-13-2007 04:28 PM

Passenger side seat controls
 
Do you have the seat control from the passenger side of one of the 126s? I need if for my 1983 300SD. Thanks

dhaghighi 02-13-2007 07:31 PM

Are either of your 124s black?
I need a right fender and front bumper cover.
Where are you located?
Thanks

jim16671836 02-21-2007 08:46 PM

Location...Location...Location
 
From now on I will use my address in any new threads so that interested buyers can get an idea of shipping costs... thank you Jim


All times are GMT -4. The time now is 06:29 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website