PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Mercedes Parts Reference Library (http://www.peachparts.com/shopforum/mercedes-parts-reference-library/)
-   -   Suspension kit rear multi link (http://www.peachparts.com/shopforum/mercedes-parts-reference-library/309420-suspension-kit-rear-multi-link.html)

whunter 12-06-2011 01:33 AM

Suspension kit rear multi link
 
Suspension Control Arm Kit

Enter: 210-350-99-99-MY

or click one of these links.

http://www.pelicanparts.com/cgi-bin/ksearch/pel_search.cgi?SUPERCAT_FLAG=Y&make=MBZ&please_wait=N&forumid=&threadid=&command=DWsearch&descriptio n=210-350-99-99-MY&x=12&y=7

Contains:

Six: Spacer sleeves.
Two: 210 350 33 06 upper front with 12mm bolt hole.
Two: 210 350 34 06 upper rear with 12mm bolt hole.
Two: 210 350 38 06 lower front with 12mm bolt hole.
Two: 210 350 21 53 center (one end with ball joint).
Six: short bolts.
Six: long bolts
Two: Eccentric Cam bolts.
Two: Eccentric Cam washers.
Six: Lock washers.
Six: Three arm retaining washers.
Fourteen: Nuts.
http://www.peachparts.com/shopforum/...thjthctyjt.jpg

http://www.pelicanparts.com/cgi-bin/ksearch/pel_search.cgi?SUPERCAT_FLAG=Y&make=MBZ&please_wait=N&forumid=&threadid=&command=DWsearch&descriptio n=210-350-99-99-MY&x=12&y=7

Chassis application:
All: W124
All: R129
All: W170
All: W201
All: W202
All: W208
All: W210


In almost every case you will need to replace the following additional parts.

Joint, x2
MB# 2203520227

Rubber mount, x2
Rear of differential, if equiped.

Rubber mount, x2
Front of differential, if equiped.

inspect the following and replace as needed.

Rubber mount, x2
Rear lower control arm inner bushing.



Home-made $15 W124 rear knuckle - LCA Bushing Tool
http://www.peachparts.com/shopforum/2749405-post21.html

http://www.peachparts.com/shopforum/diesel-discussion/238702-124-carrier-bushing-r-r.html

http://www.peachparts.com/shopforum/diesel-discussion/300339-mercedes-w124-rear-suspension-guide.html



NOTE – All prices on special order parts subject to change without notice.

.

TheDon 05-14-2012 04:24 PM

does this kit come with the spacers for the camber arms or is that if only reusing original hardware?

whunter 05-15-2012 01:15 PM

Answer
 
Quote:

Originally Posted by TheDon (Post 2937275)
does this kit come with the spacers for the camber arms or is that if only reusing original hardware?

Contains:

Six: Spacer sleeves.
Two: 210 350 33 06 upper front with 12mm bolt hole.
Two: 210 350 34 06 upper rear with 12mm bolt hole.
Two: 210 350 38 06 lower front with 12mm bolt hole.
Two: 210 350 21 53 center (one end with ball joint).
Six: short bolts.
Six: long bolts
Two: Eccentric Cam bolts.
Two: Eccentric Cam washers.
Six: Lock washers.
Six: Three arm retaining washers.
Fourteen: Nuts.

TheDon 10-23-2012 11:25 PM

Looking at this kit again, I see no brand. Other sites sell a melye kit just like this. Same kit?

whunter 10-24-2012 01:43 PM

Answer
 
Yes, it is a Melye kit.


.


All times are GMT -4. The time now is 05:33 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website