|
|
|
|
|
#1
06-21-2012, 03:11 AM
|
|||
|
|||
|
W163 Ride Height
Does anyone have any measurements to use other than the angle of the a-arms? I have a 98 320 and would like to do a quick measurement to see if my ride height is correct. To me it looks like my front is too low. If the door sill or door trim is supposed to be level or close even that would help if a measurement isn't available. If not something measured front and rear on the body that isn't going to shift around or move ;-]
Tnx Dave 
|
|
#2
06-21-2012, 08:28 AM
|
|||
|
|||
|
Yes, the level of the rocker panel can be close enough to keep the front end at a correct angle.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#3
06-21-2012, 03:54 PM
|
|||
|
|||
|
Just to clarify, the rocker panel line should be horizontal? If I have that right then mine is way way out.
I asked this on another forum and had about 20 metoo's respond :-) So this will hellp a bunch of us. I found a PDF of the measurement off of the lower a-arms with an inclinometer but don't have access to mine right now as I just moved. Cheers Dave
__________________
Where ever you go, there you are
|
 |
| Bookmarks |
|
|
Linear Mode
