PeachParts Mercedes-Benz Forum - ML500 service message

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)

- ML, GL, G-Wagen, R-Class, Unimog, Sprinter (http://www.peachparts.com/shopforum/ml-gl-g-wagen-r-class-unimog-sprinter/)

- - ML500 service message (http://www.peachparts.com/shopforum/ml-gl-g-wagen-r-class-unimog-sprinter/237630-ml500-service-message.html)

ML500 service message

I have an 2003 ML500 that displays the negative(-) mileage to oil change message.

I change the oil myself and I can't find my manual so I don't know how to reset this.

Any advice would be much appreciated! THANK YOU!

I have an 2003 ML500 that displays the negative(-) mileage to oil change message.
I change the oil myself and I can't find my manual so I don't know how to reset this.
Any advice would be much appreciated! THANK YOU!

Here are the steps that I got from the link you've given me, but what/where can I locate button 1:
----------------------------

1. Turn key to position 2.

2. Within 4 seconds press button 1 twice.

3. The present status for days or distance is displayed. Within 10 seconds turn key in steering lock to position 0.

4. Press and hold button 1, while turning key in steering lock to position 2 again. The present status for days or distance is displayed once more. Continue to hold button 1. After aproxtamely10 seconds a signal sounds, and the display shows 10,000 miles for approximately 10 seconds.

5. Release button 1.

After numerous attempts and frustration, am I required to purchase the FSS reset key?

1) shut door, wait until the dome lamp goes off.

2)button #1 is the trip reset button.

THANK YOU! I will try this out

Hello--
Would some please help me since I've tried these steps and was not able to reset the negative (-) milleage for my 2003 ML500? THANK YOU!

FSS reset

Shut door, wait until the dome lamp goes off.
Turn key to position 2.
Within 4 seconds press button 1 twice.
The present status for days or distance is displayed. Within 10 seconds turn key in steering lock to position 0.
Press and hold button 1, while turning key in steering lock to position 2 again. The present status for days or distance is displayed once more. Continue to hold button 1. After aproxtamely10 seconds a signal sounds, and the display shows 10,000 miles for approximately 10 seconds.
Release button 1.

Hello--
Would some please help me since I've tried these steps and was not able to reset the negative (-) milleage for my 2003 ML500? THANK YOU!

FSS reset

Shut door, wait until the dome lamp goes off.
Turn key to position 2.
Within 4 seconds press button 1 twice.
The present status for days or distance is displayed. Within 10 seconds turn key in steering lock to position 0.
Press and hold button 1, while turning key in steering lock to position 2 again. The present status for days or distance is displayed once more. Continue to hold button 1. After aproxtamely10 seconds a signal sounds, and the display shows 10,000 miles for approximately 10 seconds.
Release button 1.

Quote:

Originally Posted by lph_tran (Post 2020302)

Hello--
Would some please help me since I've tried these steps and was not able to reset the negative (-) milleage for my 2003 ML500? THANK YOU!

FSS reset

Shut door, wait until the dome lamp goes off.
Turn key to position 2.
Within 4 seconds press button 1 twice.
The present status for days or distance is displayed. Within 10 seconds turn key in steering lock to position 0.
Press and hold button 1, while turning key in steering lock to position 2 again. The present status for days or distance is displayed once more. Continue to hold button 1. After aproxtamely10 seconds a signal sounds, and the display shows 10,000 miles for approximately 10 seconds.
Release button 1.

How to reset FSS after an oil change

close all doors

turn ignition key to position 2

press reset button twice within 4 seconds

turn ignition back to pos 1

press and hold the reset button

turn ignition to pos 2

keep pressing the reset button until buzzer sounds and new miles display appears :thumbsup: