|
|
|
#1
|
|||
|
|||
ML500 service message
I have an 2003 ML500 that displays the negative(-) mileage to oil change message.
I change the oil myself and I can't find my manual so I don't know how to reset this. Any advice would be much appreciated! THANK YOU! |
#2
|
|||
|
|||
Ml500
I have an 2003 ML500 that displays the negative(-) mileage to oil change message.
I change the oil myself and I can't find my manual so I don't know how to reset this. Any advice would be much appreciated! THANK YOU! |
#3
|
|||
|
|||
#4
|
|||
|
|||
2003 ml500
Here are the steps that I got from the link you've given me, but what/where can I locate button 1:
---------------------------- 1. Turn key to position 2. 2. Within 4 seconds press button 1 twice. 3. The present status for days or distance is displayed. Within 10 seconds turn key in steering lock to position 0. 4. Press and hold button 1, while turning key in steering lock to position 2 again. The present status for days or distance is displayed once more. Continue to hold button 1. After aproxtamely10 seconds a signal sounds, and the display shows 10,000 miles for approximately 10 seconds. 5. Release button 1. After numerous attempts and frustration, am I required to purchase the FSS reset key? |
#5
|
|||
|
|||
1) shut door, wait until the dome lamp goes off.
2)button #1 is the trip reset button.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#6
|
|||
|
|||
THANK YOU! I will try this out
|
#7
|
|||
|
|||
2003 ml500
Hello--
Would some please help me since I've tried these steps and was not able to reset the negative (-) milleage for my 2003 ML500? THANK YOU! FSS reset
|
#8
|
|||
|
|||
2003 ml500
Hello--
Would some please help me since I've tried these steps and was not able to reset the negative (-) milleage for my 2003 ML500? THANK YOU! FSS reset
|
#9
|
||||
|
||||
Quote:
close all doors turn ignition key to position 2 press reset button twice within 4 seconds turn ignition back to pos 1 press and hold the reset button turn ignition to pos 2 keep pressing the reset button until buzzer sounds and new miles display appears |
Bookmarks |
|
|