|
|
|
#1
|
|||
|
|||
ML 270 Break Lights
Dear All,
My ML 270 fail the MOT due to the break lights are not working. It was at the MOT station for the last 7 days they went through the full circuit diagram and the ECU still they couldn't find the fault. Did you come a across this fault or have any solution for this problem. If you could help me I will more appreciates. Thanks Champ |
#2
|
|||
|
|||
Time to start over. Check the bulbs and the fuse(s). If they are good check the switch. If that's good then you get to start tracing and checking wiring.
__________________
Whoever said there's nothing more expensive than a cheap Mercedes never had a cheap Jaguar. 83 300D Turbo with manual conversion, early W126 vented front rotors and H4 headlights 400,xxx miles 08 Suzuki GSX-R600 M4 Slip-on 22,xxx miles 88 Jaguar XJS V12 94,xxx miles. Work in progress. |
#3
|
|||
|
|||
the tool to use for testing is a multimeter, specifically the voltmeter function of it. is there voltage at the bulb, at the switch, and at the fuse?
__________________
'77 240D, 504H, OM617.952, etc. |
Bookmarks |
|
|