I went to a gun show and bought a rifle. it is an M38 russian bolt action rifle. any one know about these? they use 7.62x54 rounds and i was wondering where would be the best place to get there and if u can use any other types of ammuntion (more common?) for these?

__________________
198? 300D ???K - Future DD
1989 300TE 285K - traded in '12
1984 300SD 186K - Sold in 08
1978 300SD 330K - Died in 05

I don't mean to sound condesending but if your not sure about the proper use of a firearm you need to get training. Call a local gunsmith or gunclub to find help getting aquainted with the gun.

That's not condescension, medMech, that's great advice. Plus you'll get to know some really dedicated firearms experts. They can put you in touch with NRA sanctioned shooting. Great source of info from knowledgeable people.

...uh, he's asking about sources for ammunition, not whether it'd be a good rifle to use shooting apples off his nephew's head.

Before locating ammo, you need to have the gun checked out by a competent gunsmith to ensure it is safe to shoot. Many times these old guns at the shows are toast, or too old to handle modern smokeless powders.

It is very likely you could have picked up a "mantel piece".

__________________
Mike Tangas
'73 280SEL 4.5 (9/72)- RIP
Only 8,173 units built from 5/71 thru 11/72

'02 CLK320 Cabriolet - wifey's mid-life crisis

2012 VW Jetta Sportwagon TDI...at least its a diesel

Non illegitemae carborundum.

My grand dad had one of those I believe - it has like an extended magazine that protrudes in front of the trigger guard, at an angle if it is the one I am thinking of. They were actually made by Remington, I believe, and are all around 1917 vintage.

Its dangerous to play mix and match with guns like that. I would go to a gun shop and ask them about special order for the proper ammo - also check the mag ads, obsolete ammo is usually listed in those, especially Guns and Ammo. I believe the story on those is Remington made a zillion of them for use in WW I by the czar, and when Russia went commie, they got stuck with them and they got dumped on the American market. They used to be real cheap and real common.

You might want to use my dad's method for firing an old gun like that for the first time. It involves a couple of saw horses, and some duct tape, and rope, which you attach to the trigger, so you can pull it the first time without having you face in it. Also, a lot of those are "closet queens" and may not have been fired in years. Run a few patches down the barrel before you shoot it to make sure the thing isn't full of dead mud daubers or something.

Any bigger gun store should have ammo for it .There are a lot of that model floating around ,used to be able to buy them for 20 bucks or less , they are rugged but rather awkward to handle . There were a lot of crude cut down sporters made from them.............

William Rogers.............