![]() |
|
|
|
#1
|
|||
|
|||
![]()
I have a newly acquired 03 honda civic hybrid with an odd problem. All of the power door locks work except the drivers door lock. Since it is a honda, there is only 1 master power door lock switch in the vehicle which is on the drivers door.
I have came to the conclusion, after doing some testing, that the Door lock switch is good and that the power door lock module is good. What I think is bad is the power door lock actuator motor and/or the wiring associated with it. I did avalaible voltage btwn the two wires going to the actuator motor and i get nothing, even when I press the lock or unlock button. I suspect an open in the wiring to the door lock actuator motor but why and how?
__________________
2001 E55 2001 E320 Sedan 2001 Subaru Legacy 2006 SLK280 2016 Subaru Outback 3.6 |
#2
|
||||
|
||||
Answer
I suggest you subscribe to this service for Honda diagnostic and service data.
Honda Service Express https://techinfo.honda.com/rjanisis/logon.asp |
![]() |
Bookmarks |
|
|