Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > General Discussions > Off-Topic Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-01-2002, 11:50 AM
yosshimura's Avatar
Registered User
 
Join Date: Oct 2001
Location: Liberty City, FL
Posts: 653
300SEL / 420SEL - what body style / engine?

Well, I have had a "minor" financial set back and if I still go on purchasing an MB, it won't be with the budget I was planning. So, I am down to a $7-$8K budget. I might be able to pick up a 90-91 300E w/the M103 (which is a plus), but also saw some big body style cars for $7K advertised on ebay and autotrader, that looked very nice and seem to be cheaper or more of them than the E class

I want to do a search on them over on the tech forum, so I need the body style and engine code.

one example was an 890 420SEL - I think these are V8's, so probably will eliminate it if it has the same issue with the timing chaing as the 400E.....

the other was a 90 300SEL - Seemed like the same body style as the 420, but a 6 cylinder. PLease tell me it has the M103 .

thanks

Reply With Quote
  #2  
Old 08-01-2002, 09:42 PM
mbz380se
Guest
 
Posts: n/a
A 420SEL's timing chain should probably be changed around 100K.

However, some things you should know about W126 cars:

All V8 cars use a 16-valve aluminum V8 that is super durable if taken care of. They may need valve guides done at 150K to 200K if the car smokes while driving down steep hills; at least that is what happened to our car.

The only W126 V8 to avoid is the pre 1984 380SEL, with the single row timing chain, which can and will break early and often. Most of these cars have been converted to double-row timing chains.

The 380, 420, 500 and 560 are all good cars. A good compromise is the 500SEL....more power than the 380, more torque than the 420, and it runs on regular gasoline, vs premium gasoline as in the 300, 420, and 560. The 380 also will run on regular gasoline.

I would take a 3.8 liter V8 car over a 3.0 liter inline-6. Thanks to the rear-end gearing, the 3.0 liter W126 s-class will turn near 3,000 rpms at 60 mph, while the 3.8 liter car turns around 2,100 rpm at 60. Plus, the M103 inline sixes have more head-related problems than the V8s seem to have. The only head-related problem on the V8 was slight valve guide wear, and then the t-chain broke at 196K (about two months ago) because we were dumb and never changed it. If you find a gas car will all service records, etc, you probably won't go wrong, whatever you do.

Oh yeah, the 560SEL could be found for around 7K, and it would smoke a 300E in a straight line. Fun, huh?

-Sam
Reply With Quote
  #3  
Old 08-02-2002, 09:07 PM
Benzman500
Guest
 
Posts: n/a
MBZ380se I don't know about the american 500 but the my 500 was 97 octane (93 in USA) My parents ran it on 87 for many years never did any harm but it enjoyed 93 when I had it.
personally the 300se-sel is to slow for me
They also come with less options standard but by 90-91 everything was pretty much on the w126's
I would go with the 420 out of the 2
my 2 cents

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page