Happened to our washer. I did some research and figured out the typical cause and fix. Ask me if you need help.

Sixto
95 S420
87 300SDL
00 Neptune 4000

The same thing happened to me. In my case it was that the door was not locking. You may want to check that.

JayGH, that was essentially the problem in our case. Something fried the circuit in the controller board that locks the door and enables spin cycle. I don't think it was the wax motor since the old one works with a new controller board. I replaced the wax motor just to be safe. What were your symptoms and what was the fix?

Eric, our Neptune has a solid front door and it's not particularly heavy as washers go.

Sixto
95 S420
87 300SDL

Maytag is sending out free controller boards, call them up and ask for the PHA kit to be sent to you. And get a new latch, install a inline 1 amp fuse to protect the board, to the wax motor.

__________________
1984 380SL-driving and service privileges.

Sixto - I am impressed Guess you are a Maytag Repairman also!

__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif
15 VW Passat TDI
00 E420
98 E300 DT
97 E420 Donor Car - NEED PARTS? PM ME!
97 S500
97 E300D
86 Holden Jackaroo Turbo D
86 300SDL
(o\|/o)

Apparently the job opened up recently...

http://www.usatoday.com/life/2003-09-22-jump-obit_x.htm

__________________
2009 ML350 (106K) - Family vehicle
2001 CLK430 Cabriolet (80K) - Wife's car
2005 BMW 645CI (138K) - My daily driver
2016 Mustang (32K) - Daughter's car