MANY OF YOU MAY GOTTAN ANSWER ABOUT THE BUMP PAD THING BUT AS FOR ME I SEARCH I DONT SEEM TO FOUND ANYTHING ON THE 16V....HERE IS MY QUESTION IF ANYBODY OUT THERE IS LISTENING PLEASE HELP...IF I INSTALL THE Eibach SHOCK ON MY 16V...WITH THE BUMP PAD FRONT/2 AND REAR STOCK/4 WILL THAT HAVE AN HIGH/LOW PROBLEM?! AND THE LAST QUESTION IS WILL THAT WEAR OUT THE INSIDE OF MY TIRE B/C OF THE -CAMBER?! PLEASE HELP THANX.....THANK - YOU -ALL =)

JOHNSC16V

John,

I'm thinking about doing the same thing with my 16V. I believe that your setup will work with 2-bump in the front and 4-bump in the rear. Personally, I'll probably go with 1-bump in the front to get rid of all that damn fender gap!

As far as negative camber in the rear, I'm hoping that with 4-bump pads, the rear won't be lowered enough to create a big problem. If it does, then I'm going to buy adjustable arms from Delsing Motorsport (www.delsingmotorsport.com) for $275.

Hope that answers your questions!

Daniel

------------------
87 190E-16V Blk/Blk 5Spd.

DAN16V,

THANX, I MIGHT DO THAT TOO GOING FOR 1 FRONT
AND 4 REAR...AND IF THAT DONT WORK I SWITCH IT BACK TO 2 / 4....BY THE ARE U THE SAME DAN WHO HAS HIS SELF-LEV. REMOVE FROM HIS SHOCK?! HAVE U DONE IT YET?! TELL ME HOW IT GO...THANX

JOHNSC16V

John,

Yes, I'm the one removing my self-leveling suspension. I haven't done it yet, because I'm still trying to find out if Koni makes shocks that will fit the rear of my car. They make some for the front, but because the car came with the self-leveling struts they don't list any shocks for the rear. I'm trying to find out if the normal 190E Konis will fit.

Can't wait to get it installed!

Daniel

------------------
87 190E-16V Blk/Blk 5Spd.