Talked to the folks at maval about their steering boxes...

[bodyart27]

I have to say it is pretty neat to be able to call a business first time and be able to talk to one of their techs. I've been researching rebuilt steering boxes and I wanted to be sure I was not going to get a box back that was internally worn out, with just new seals and a fresh paint.

http://www.mavalgear.com/

The guy I talked to say they go through multiple testing steps to ensure that the unit performs like a new box (amount of torque required to turn left and right, pressure test for leaks, check parts for tolerances, etc). He did say they get about 1% back, and after diagnosis he said the major cause of failure is old fluid with contamenants coming out of the old pump.

He said they carry a lifetime warranty. That makes me feel alot better about that amount of cash.

I cleaned up my box last night - determined the leak is coming from the back half of the box where their are four bolts that hold the plate where the steering wheel shaft hits the box (kinda a square plate). I torqued it down a bit more on the four bolts and I'll check to see if it is still leaking. If so, I'll be ordering a maval box.....

Just thought I'd share

I bought a rebuild off ebay for 289.00. I installed it, and it doesn't come close to factor specs. It was better than the one I was replacing but not good. I called them and they sent me a new one. I haven't installed it yet. I'm going to take it to a local indy to inspect everything to make sure the rebuilt is the problem.

I'm not inpressed with rebuilts, now, when it comes to sterring boxes. I think this is one of the things that it makes sence to buy new. Regardless of cost.

[bodyart27]

My main cocern was getting a "deal" and finding out, to your point, it wasn't a good deal afterall....

I'm with you - I don't like the risk and I like OEM, but even with a MBCA discount at my local dealership, a new box was well over 1,300....

for that amount of $$$ I can adress a lot of other deficiencies with my car

[TwitchKitty]

I would be happy with a rebuild if I knew and trusted the rebuilder. I would prefer to do it myself, but the overhead is too high. I don't know anything about Marval. Where do they rebuild steering boxes and how much do they cost?

[Hatterasguy]

$600 is about right. Keep us updated, my used box isn't that great I will have to go this rout eventually.

[Ken300D]

Ouch. Ouch. Ouch. ! ! !

Go to a parts recycler and buy one off a rear-ended low mileage car.

Ken300D

[oldnavy]

Originally Posted by Hatterasguy

$600 is about right. Keep us updated, my used box isn't that great I will have to go this rout eventually.

I know one local who used these guys and one from my VW forum also has used Car Steering Wholesale and was happy with with service. 300D is $325 + $150 core deposit that is returned when they recieve your old unit.