|
|
|
#1
|
|||
|
|||
fluid leak 1992 r129
How are are you all doing. I have some sort of fluid leak about 8 in in front of the drivers side rear wheel.I was wondering if anyone has an idea what this could be.
Thanks for you time |
#2
|
||||
|
||||
Color? Aroma? Oily?
How are your shocks? How are your brakes?
__________________
1989 300E 144K |
#3
|
||||
|
||||
See if it is colorless/odorless, as it could jsut be water draining out, if the car has been rained on or washed recently.
I think the fuel pump is on the other side, but not sure, if i am wrong, then it could be a fuel leak. Only other thought would be a brake fluid leak, does the brake pedal feel normal?
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
#4
|
|||
|
|||
fluid lead 1992 r129 300 sl
The fluid is clear but very thin and drips from the plastic cover that is under the car.The fluid has a slight oily smell.The brakes and shocks are fine.Thanks for the input
|
#5
|
|||
|
|||
From this description, it makes me think that the leak may be from the hydraulic cylinder nearby to the location of the dripping fluid. An easy check is to look at the level of fluid in the system at the pump in the trunk to see if it's at the full mark, and/or, with someone watching the point of leak, put the top up and down a couple times. If the leaking speeds up, then it's the cylinders.
__________________
Bob Jones Bradenton, FL '87 560SL-Sold '99 SL500 For Now |
#6
|
|||
|
|||
I'm not an expert, but based on the location and the small amount of oily fluid.......I'd say that's the only plausible explanation. My understanding is if a cylinder goes out, the top won't work at all
__________________
former: 83 300D, 97 C230, 93 400E current: 08 C300 Luxury , 92 500SL |
#7
|
|||
|
|||
It's a leaking hydraulic cylinder(s). Be prepared to rebuild all 12 unless they were recently done. Dennis Ficken is the rebuild guru. And yes the top will work for awhile with a leak. Once the seal blows completely or the fluid level drops beyond minimum in the pump, no dice.
|
#8
|
|||
|
|||
If as most of us think, that it's the cylinder seal that's causing the leak, I agree with Lee that Dennis is a terrific resource when it comes to these seals. He rebuilds them better than new, warrants for 3yrs, turns them around within a day or two after receipt, all for 1/3 of what the Dealers charge. Here's his contact info...
Mercedes Hydraulic Cylinder Rebuilder Dennis Ficken mercedescylinders@sbcglobal.net16285 S. Chester Olathe, Ks 66062 (913) 544-4521 Bob
__________________
Bob Jones Bradenton, FL '87 560SL-Sold '99 SL500 For Now |
#9
|
|||
|
|||
fluid leak1992 r129
you are correct it is a hydraulic fluid leak. Thank you all I would never be able to afford this car if it wasnt for all of you guys.
|
Bookmarks |
|
|