1993 300D 2.5 Turbo, I would like to know if the sensor can be replaced without removing it from the inferior conexion to the cooling circuit. Please help.
Juan

__________________
Juan

Pretty easy fix. Drain the tank, with a squeeze type turkey baster (sp?) remove the wire, rotate the snap ring so you can get to it, remove the snapring, pull out the sensor, replace with a new one, re- install the snap ring and the wires. Top of the tank and go. DIY for abt. $30 bucks.
Have fun

__________________
Den
1993 MB 300D 2.5
2001 VW Jetta TDI 5 spd.
2001 new bug TDI 5 spd.
Motorcycles

also replace pin connector 003 545 2626 x2 & 011 545 71 28 connector with new sensor.

__________________
MB STARS Master Guild Technician,17 years MB tech
14 years independent shop owner

Thank you for your help. The doubt I had, if there is room enough between the tank and the panel to introduce the new sensor. I see it can be replaced.
Thank you again
Juan

__________________
Juan