Arthur Walton, need help 300 E

[deportes]

Well the car was running good after the work I did over the weekend.
The wife says it's acting up again.

Socket 8.

codes 9 and 13.

What is going on now? ANOTHER COIL?

[Arthur Dalton]

9 is o2 sensor fault
13 is limit adaptation mixture lean or rich..
Because of the coil/ignition previous problems , I would give it a good run to clean the sensor before condenming it.
Also, look for any posssible vac leaks.
No ignition codes ...

[deportes]

Thanks, and sorry for the Walton bit. No other codes,where is the O2 sensor located?

[Arthur Dalton]

Originally Posted by deportes

Thanks, and sorry for the Walton bit. No other codes,where is the O2 sensor located?

Actually Walton, Dalton , whatever makes no difference, as I prefer not to have post directed at me in the subject line.. I read them all and if they are pertinant, they get answered.

Anyway , the sensor is in the exhaust pipe before the cat..
There are pages upon pages on test procedure in the archieves to help one check it out.
Try the test run in the meantime .. I would clear the codes one more time ........

[deportes]

Ok Arthur thanks.

[Arthur Dalton]

Thank you.....