|
|
|
#1
|
|||
|
|||
Power Seat memory not working
For some reason my drivers side power seat memory no longer functions! On monday I went to push button 1 since my wife last drove it and it was set to 2 at the time. Well 1 went way to far so I hit the green button and set 1 again once I had my seat where I wanted it. Next thing I know I hit 2 then 1 to make sure it set right. Well the first push of 1 sends the seat in all sorts of weird directions, then the second time sends it in yet another array of directions, none of which are the same or my setting. So I say oh well and drive to work, then I hit the button later in the day and now all I hear is the relay under the seat clicking, but no movement. The seat works fine in all directions, just not the memory buttons. Any input would be apporeciated! Like if it is the controller, or some relay, a fuse, anything I guess.
On the other side my seat works fine except the rear up/down, the motor has power and the relays a click. I can even see the cable from the motor to the seat move a hair when activated, but for some reason she just does not work. Like there is a bind somewhere that I can not see. I lubbed everything and still nothing on that one. Thanks,
__________________
~Jamie _________________ 2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's. 1986 190E 2.3 Black, Auto, Mods to come soon..... |
#2
|
||||
|
||||
__________________
Mike Murrell 1991 300-SEL - Model 126 M103 - SOHC "Fräulein" |
#3
|
|||
|
|||
Thanks, will try that one later!
__________________
~Jamie _________________ 2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's. 1986 190E 2.3 Black, Auto, Mods to come soon..... |
Bookmarks |
|
|