PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   OM617 Part ID: Lift Pump? (http://www.peachparts.com/shopforum/tech-help/107295-om617-part-id-lift-pump.html)

JamesStein 11-07-2004 09:16 AM

OM617 Part ID: Lift Pump?
 
1 Attachment(s)
Is this the 'lift pump' or mechanical fuel pump?

Fastlane lists it as the primer pump assembly. But looking at the part, it appears that it is the fuel pump.

stevebfl 11-07-2004 10:31 AM

Either term works for me, but I prefer to cal it the feed pump.

It is the pump that moves the fuel from the tank to the pump cavity.

Brian Carlton 11-07-2004 11:11 AM

Quote:

Originally Posted by JamesStein
Is this the 'lift pump' or mechanical fuel pump?

Fastlane lists it as the primer pump assembly. But looking at the part, it appears that it is the fuel pump.

As Steve mentioned, either term is applicable. The pump, as shown in the photo, includes the primer pump. It is the round black cylinder that is threaded into the center port on the fuel pump.

What's the cost? The primer pump, by iteself, is about $20. The fuel pump, with the primer pump, as shown in the photo, would be considerably more.

JamesStein 11-07-2004 02:21 PM

Cost is $150.56. So yes it is significantly more expensive. I wish I could get one locally. My wifes car is leaking fuel severely from the pump. It very well may just be a gasket. I guess I won't know for sure till I yank it and take a closer look.

Brian Carlton 11-07-2004 03:27 PM

Quote:

Originally Posted by JamesStein
Cost is $150.56. So yes it is significantly more expensive. I wish I could get one locally. My wifes car is leaking fuel severely from the pump. It very well may just be a gasket. I guess I won't know for sure till I yank it and take a closer look.

Are you quite sure that the lift pump is leaking and not the primer pump? The old style primer pump is a clear cylinder and it leaks all over the place. It can be replaced by that new style, black cylinder, that does not leak at all.

If you have the old style primer pump, my bet is that the primer pump is what is leaking.

JamesStein 11-07-2004 07:50 PM

It does have the original primer pump on it. However, from the looks of it, the leak is actually on the bottom of the assembly not where the primer pump screws in.

The top of the assembly is dry, but there is fuel.. well mostly WVO all over the place underneath of it.

Which would lead me to believe that its not the primer pump thats leaking.

Perhaps I'll try swapping just the primer pump out and see. But then I'll have an extra primer pump if I need to swap out the whole assembly.

Brian Carlton 11-07-2004 08:32 PM

Quote:

Originally Posted by JamesStein
It does have the original primer pump on it. However, from the looks of it, the leak is actually on the bottom of the assembly not where the primer pump screws in.

The top of the assembly is dry, but there is fuel.. well mostly WVO all over the place underneath of it.

Which would lead me to believe that its not the primer pump thats leaking.

Perhaps I'll try swapping just the primer pump out and see. But then I'll have an extra primer pump if I need to swap out the whole assembly.

Sounds like you have verified the source. However, can you tell if the pump is leaking from the gasket or whether the seals on the pump might be bad. You don't want to spend $150. on a bad gasket. :mad:

JamesStein 11-07-2004 09:41 PM

Perhaps I should just order the gasket and a new primer pump. Then take the lift pump from my garage queen. (I still refuse to call it a parts car, although due to the parts I've stolen off it its no longer driveable.) That way I'll at least be able to get the car back on the road the same day. And if I need a lift pump, I can wait for it to arrive. I just hate doing a job twice. Or in this case it would be 3 times. Since if I needed new lift pump, the new one would go on the car thats being driven every day and not my 'parked car'.

Brian Carlton 11-07-2004 09:45 PM

If you order the gasket, you probably could have it in two days. Unless the leak is just abysmal, you probably could drive it for another two days until the gasket arrives. Would prevent doing the job twice. We all hate that. :mad:


All times are GMT -4. The time now is 10:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website