Am I getting any closer? 380SE **UPDATE**

[Jinxie]

WOW! Never seen this before...any ideas?!

Is my timing out??
I still cant get my 84 380SE to run right....or run at all now. I removed both valve covers and checked the chain, tensioners and tension and it seems to be OK. I rolled the engine over until the crank was on 0. Both cam marks didnt line up. I rolled the engine over until they lined up. Both line up perfectly at the same time, but the crank is at about the 270 degree or so position. I pulled #1 plug and the piston is at exactly TDC when the cam marks line up. Why doesnt the crank mark 0 and TDC of the piston line up? I installed #1 spark plug wire according to the cam marks. What am I missing here?

Thanx again for the help!