Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-10-2004, 05:42 PM
Registered User
 
Join Date: Sep 2003
Location: Suburban Washington DC
Posts: 894
Using a spark plug voltage tester.

I just got one of these OTC spark plug voltage testers on Ebay:

and it didn't come with any instructions as to interpreting the readings. I tested it on a great running '93 Civic with new plugs and all the plugs read 4kV. Next I tested it on an '81 Olds Omega I just got. This car starts up ok but after a 2 minutes it starts to miss and then dies after which it won't start at all. I put in new plugs and it was fine last week during warmer weather when it ran very smoothly. For the few minutes it did run, I hooked up the tester and it was reading in the 10 to 14kV range. What do these reading mean in general and what specifically would it indicate on this Omega? Weak plug wires?
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page