PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Cam Timing (http://www.peachparts.com/shopforum/tech-help/115254-cam-timing.html)

lyonstexas 02-10-2005 09:44 AM
Cam Timing
 
On my 1992 300SE I am about to reinstall the head which has received a valve job. On the intake cam (24-valve DODC inline 6) there is a spring loaded cam chain sprocket. I can set to cams using the 4mm pin but when putting the timing chain on, what is the procedure for setting the intake cam gear? Is it supposed to be tension loaded? If so, how much?

Thanks
Tim

lyonstexas 02-10-2005 10:17 PM
bump. Anyone?

myarmar 02-10-2005 10:45 PM
Read this article:
Mercedes-Benz Head Gasket Replacement
by Steve Brotherton
http://www.continentalimports.com/ser_ic100345.html

lyonstexas 02-11-2005 05:33 PM
Thanks!! That is what I needed.

Tim


All times are GMT -4. The time now is 01:19 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website