Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-10-2000, 03:31 PM
Registered User
 
Join Date: Nov 2000
Location: west chicago,il,usa
Posts: 69
Hello again-AWESOME site!!!

Can someone help me understand the symptoms of
improper wheel allignmnet? Desides the obvious
drifting, what are other symptoms if any?

Also, are there specific and/or ideal allignment
specs for my 92 500sl? If so, where can I get them.

Thanks again for all the help!!!!



Reply With Quote
  #2  
Old 12-10-2000, 04:07 PM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
Proper alignment allows effortless control of the automobile. As such, improper alignment detracts from this in any way you can imagine.

Driving back from the airport this weekend we drove a rented Suzuki Vitara V6 SUV(100mi drive). When we dropped it back this morning I drove the wife's ML320. Its possible with poor alignment to make a ML320 as unstable at 70 as the Vitara.

Drifts, dives, pulls, lack of steering return, oversteer, understeer, crabbing and maybe most important TIRE WEAR.

There are specific recommended settings for your car, as all cars, but as an alignment tech I am most interested in the difference side to side in caster and camber angles. Your car should have around 9 degrees Caster and negative 0.2 degree Camber (these are from memory and are used for illustration)on the front. The rear wheel Camber is dependant on vehicle height and I would like it around 0.5 negative. With hydraulic leveling the car should be level and Camber similar side to side in the rear; that is most important.

I always drive the car for specific drivabilty before measuring. My final alignment specs are based on a combination of how the car drives (with its tires the way they will be left), how it measures, how much I can compensate without creating other conditions, and previous wear history of the tires. Basically on a neutral car I will set the caster 0.25 to 0.5 deg more positive on the right side and the Camber 0.25 to 0.5 deg more positive on the left. This tends to overcome the general tendency to drift to the right.

__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TWM Wheel KBA43665 - Need Help kogermeister Mercedes-Benz Wheels & Tires 1 01-28-2007 11:05 AM
Euro-Spec. wheel covers. Veloce300DT Mercedes-Benz Wheels & Tires 0 01-18-2005 09:01 PM
Vacuum pump mechanical wheel & drive track questions. ORIGINAL TOPIC! Matt Petty Diesel Discussion 7 07-13-2003 03:00 PM
rear wheel bearing 190 Jovan Tech Help 1 05-21-1999 10:00 PM



All times are GMT -4. The time now is 09:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page