![]() |
Hot re-start question
Trying once again to diagnose a hot re-start 560sl after wife had to drive me to pick it up at 6 in the am after it wouldn't re-start after a short trip to WMT. Today a replaced the coil and went to dinner. The car sat for 2 hours then started right up, but 30 secs later stalled. Luckily, I was able to get it to start after about 5-6 frantic cranks. Made it home uneventfully.
I was looking for clues in the previous owners files and found the same problem about 75k miles ago. The previous mechanic apparently replaced the brushes on the alternator. I found no other references to the problem after that. Is there any way an alternator could have anything to do with a no start or hot stall condition? i'm willing to try just about anything at this point. Thanks. JBoggs |
All times are GMT -4. The time now is 08:41 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website