![]() |
|
|
|
#1
|
||||
|
||||
![]()
I've gotten most things repaired on this ride but the speedo is still dead. The fuses aren't the problem and everything is plugged in...
So I'm basically at a loss where to start. I did remove the sensor in the rear diff (is that a VSS or for ABS?) and it looked fine but heck if I know. As I understand it's very basic and uses a magnet to sense what's going on. The lil wheel it "sees" inside the diff turned freely also. Is there a way to test that piece on the diff if that's for the speedo? Does anyone just think my speedo is dead? If so, can this be repaired easily after I do some tests? Thanks! ![]()
__________________
I'm not a doctor, but I'll have a look. ![]() '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
1986 300SDL Question | Marcb | Diesel Discussion | 21 | 02-17-2010 07:17 PM |
300 SDL vs. 300 SD ? | Benster Tom | Diesel Discussion | 8 | 03-23-2004 11:02 PM |
87 SDL - 2 pressure sensors on AC drier? | sixto | Tech Help | 4 | 05-24-2003 03:32 PM |
speedo is flaky | mhingram | Tech Help | 2 | 01-06-2003 05:54 PM |