Whats the book labour for a radiator installation on a 300E?
 

as title says.

actually, does anyone have a diagram showing how to remove the radiator from the mb cd manuals.
thanks

There is a DIY write up at the top of this site. Its an easy DIY job, just a little messy.

Flush your coolant if its time, at the same time.

Agreed. It was ironically, my first DIY! Surprisingly easy. And I didn't have a manual to consult at the time!

And if you have catch basins to hold the fluid that will pour out of the bottom connections, it's not that messy either...

ok thanks,
but i just want a diagram from the cd manual also..
although that DIY posted by that guy looks very helpful.

I would be surprised if the book gives more than .5 hours for radiator R&R.

Good luck,

Yea radiator replacement is a good and easy DIY job. I didnt have the reference to the posting when I changed the radiator on the 260E. Quite straightforward and the sticky on this website would def. come in handy.
good luck.

Removing and Installing Radiator, from the CD Manual

sorry to say if u need directions on removing a radiator,wich has 4 clips 2 hose clamps,and 2 tranny lines.Than you should not atempt to do it....And if u do then there is another little hint when pouring in the coolant.Make sure the ignition is on and you have the heater set to defrost.now pour in the collant slowly switching with water every 2 liters.till it is full.than run car with rad cat off so sistem can bleed /.