|
|
|
#1
|
|||
|
|||
Diagnostic socket on 260e W124 1989
Could somebody please tell me if there is a diagnostic socket on the above model. If so where is it located and what is the pin configuration.
__________________
260pete |
#2
|
||||
|
||||
Its on your driver side fender wall. It has a screw on cap. I don't know the pin configuration but pin 3 seems to be very important if you do a search on the forum
|
#3
|
|||
|
|||
Yes I found this socket. It is a 9 pin socket. As I have the CISCO Palm Scanner they only refer to 8 pin,16 pin and 39 pin sockets for diagnostics purposes Jim F has reviewed this on his web page and there is no mention of a 9 pin socket which I can plug the unit into. The management system I believe is Bosch CIS-E so could anybody clarify this situation. Please help as the scanner was quite expensive and now redundant at the moment
__________________
260pete |
#4
|
||||
|
||||
Email JimF directly.
Last edited by yal; 09-30-2003 at 02:05 PM. |
Bookmarks |
|
|