|
|
|
|
|
#1
12-18-2012, 05:48 AM
|
||||
|
||||
|
'90 TE incident, now no start
Short and sweet..
I hit a curb really hard, doing 30mph at least. Car was running when stopped. Got it towed home today and no start. Crank's fine, just no start. I don't think I'm hearing the fuel pump's prime with the key. Is there an inertia switch for the FP's that I don't know about? '90 300TE, runs great otherwise.
__________________
08 R320 CDI current Past 95 E420 87 300D Turbo 5spd 90 300TE 83 300SD 85 300TD 92 400E 85 190D 
|
|
#2
12-18-2012, 08:25 AM
|
|||
|
|||
|
No inertia switch on any MB.
The fuel pump is controlled by the MAS relay. There are 2 pumps on that car, both MUST run for the car to start.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Linear Mode
