Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-18-2005, 10:06 PM
Registered User
 
Join Date: Sep 2004
Location: DFW / Collin County Texas
Posts: 1,882
E320 A/C Compressor Grind / Belt Squeal W210 HELP!!!

This is on my friend's car. 1997 e320 (W210) with 145,000 miles. He was driving along and heard what he calls "a loud noise" followed by what he thought appeared to be smoke coming from under the hood. He immediately pulled over and turned the car off. He waited a bit, then started the car again. The A/C was now blowing warm air (was cold before the incident). So he turned the A/C off and has been driving without A/C for several days.

He brought it by my house today after work. With the car idling, I turned the A/C on and a second later heard an abnormal grinding noise followed by a belt squeal, and then nothing (noise stops). About a second later, it starts again; grinding noise, belt squeal, stops. And the cycle continues. I only let this go on for about 5 to 10 seconds and shut it off.

He's going out of town in a couple days and leaving the car with me at which point I'll be better able to diagnose the problem. I plan on hooking up the gauges as well as turning the clutch and hub to get a better feel for what's going on. But I'm betting it will need a new compressor and dryer. Should I just go ahead and order one from FastLane?

Also, any inside tips or tricks I should know? For instance, I know some of the earlier compressors tend to leave "black death" spread throughout the system - will I need to remove all the hoses and parts in order to flush? What about metal shavings - will a compressor failure send those circulating through the system? Also, what type of oil and how much should I add to the compressor when replacing?

Finally, in the event that I'm too busy to do this for him (I'm still deciding), how much should a job like this cost him at a dealer or reputable indy?

Thanks in advance to all the helpful people on this board!
__________________
08 W251 R350
97 W210 E320
91 W124 300E
86 W126 560SEL
85 W126 380SE Silver
85 W126 380SE Cranberry
79 W123 250
78 W123 280E
75 W114 280
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
W210 E300 serp belt driving me crazy!! slowmoe Diesel Discussion 3 12-31-2003 08:54 AM
W210 E300 belt question slowmoe Tech Help 5 12-28-2003 10:17 PM
W210 belt question slowmoe Diesel Discussion 0 11-25-2003 06:59 PM
Replacing belt on E320 JOHN07 Tech Help 4 11-08-2003 10:35 PM
Slipping A/C belt on c280 ? DavidF.C280 Tech Help 5 06-25-2001 12:23 AM



All times are GMT -4. The time now is 07:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page