|
|
|
|
|
|
#1
|
|||
|
|||
|
"Maintenance Required" message
How do you reset the "maintenance required" message on a 98 E320??
I have tried the instructions in the owner's manual to no avail. Is there a software program for my laptop and if so where do I purchase it.. Thanks |
|
#2
|
||||
|
||||
|
Just curious. What are the instructions provided in the owners manual ?
__________________
'91 300-SEL |
|
#3
|
|||
|
|||
|
Maintenance Required Message
Manual says: (doesn't work)
1. Turn the electronic key in steering lock to position 2. 2. Within 4 seconds press button 0 twice 3. The preset status for days or distance is displayed. Within 10 seconds turn electronic key in steering lock to position 0 4. Press and hold button 0, while turning electronic key in the steering lock to position 2 again. The preset status for days or distance is displayed once more. Continue to hold button 0 After approz. 10 seconds a signal sounds, and the display shows 10,000 miles (15,000 km) for approx. 10 seconds. 5. Release button 0 |
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How do I cancel the message on odometer | joetam | Tech Help | 10 | 03-22-2004 11:35 AM |
| Resetting the Error Message | DiDi | Tech Help | 5 | 11-01-2002 07:32 PM |
| Oil Sensor Defective message on Instrument Cluster | mitul | Tech Help | 2 | 06-06-2002 06:09 PM |
| Turning off annoying message | Glenn Polanco | Tech Help | 1 | 05-01-2002 05:48 AM |
| check engine light and message center | mick | Tech Help | 4 | 04-17-2002 12:59 AM |