![]() |
Morning After
Hi All,
I have a W124 1993 model. Recently I have a problem of vibration and shaking of the car while driving. The garage managed to solve that by removing something, not sure what. Then after a few days, I have this problem of difficult starting in the morning. The engine turns and dies. I have to do that for 4-5 times before the engine will start. Then initially it sounds like a motorboat before reverting back to a mercedes engine. Once the engine is hot, there is no problem for the rest of the day. But come morning, the whole starting procedure has to be repeated. This is getting pretty annoying. I tried to turn the ignition on for half a minute a couple of times before actually starting, but it doesn't help much. Any ideas from the specialists out there or anyone with a similar problem? |
Not a lot of help here, but i'd build a code reader and see if the ECU, EA/IS/CC, or emissions control is throwing any codes that could lead you in the right direction.
Heres a list of codes and a code reader schematic in a different thread: http://www.peachparts.com/shopforum/tech-help/107630-e320-16-pin-dtc-charts-inc-pin-8-pin-14-a.html |
Do a search on OVP relay.
Next time it won't start , tap that relay... |
All times are GMT -4. The time now is 03:23 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website