|
|
|
#1
|
|||
|
|||
Valve adj on a 59 220s
I need to know the valve adj specs for 1959 220s eng. no. 180 924 10
I also need to know if you check for the adjustment between the cam and rocker or the top of the valve and rocker. |
#2
|
||||
|
||||
between the cam and rocker
my old chiltons just covers fintails but i suspect they would be the same. the 190c is .03 intake and .07 exh. the 220 and 230 are .03 and .06. these are cold dimensions. measure on the circular part of the cam not the lobe.
in the absence of firm info i would use 3 and 6. good luck tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#3
|
|||
|
|||
Thanks guys I just spent 4 weeks totaly rebuilding this engine and could not get a good answer on this topic. I fired it up this morning and it purrs like a kitten , nice and smooth. Its always nice to here a fresh rebuild start right up first thing. ps. I do have the valves that are adjusted buy a crowsfoot.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|