|
|
|
#1
|
|||
|
|||
Source for on-board read-outs 95 C280
Is there some place I could look that would give me the "tricks" for on board diagnostics. I mean those techniques where you push a button for a period of time and it flashs some kind of code or information? I hope I didn't use too much technical jargon.
|
#2
|
|||
|
|||
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
||||
|
||||
I think he means the climate control module tricks. Start with this thread, C230 A/C Diagnostic display (Climate control)--How to use, then search this forum for more information.
Good Luck, Dan
__________________
2012 E350 Bluetech |
#4
|
|||
|
|||
Climate control still worrysome
Thanks for the reply Dan. You're right about what my question was. I followed your thread and found the instructions and I followed them to the letter. I was able to bring up the 01 and the temp. but nothing happened when I pushed the up/down arrows. It just stayed on 01. What do you think?
|
#5
|
||||
|
||||
Hmmm...The arrows have always worked for me. There is a method to reset the climate control module using the front panel buttons. Search the forum and see if you can find it. I'll also see if I can track it down.
Dan
__________________
2012 E350 Bluetech |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|