|
Heres a real simple question
Windshield wipers, how do you remove the arm? After removing the 13mm nut on the wiper shaft, It does not want to just lift off. I don't see any splines so I'm thinking its a taper press fit. Do I need to use a small gear puller? Thanks
|
do you refer to the 450 sl?
if it is like my 123 cars, there is a cover over the end that you grab and flip up. then there is a little bolt that you take out and then it lifts off. that is what i remember. could be faulty memory.
good luck tom w |
Once the bolt is removed they should come off, chances are yours are stuck some wd 40 and an overnight may work but you will need to pry them up this may take more pressure then you realize.
m |
| All times are GMT -4. The time now is 07:35 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website