Windshield wipers, how do you remove the arm? After removing the 13mm nut on the wiper shaft, It does not want to just lift off. I don't see any splines so I'm thinking its a taper press fit. Do I need to use a small gear puller? Thanks

__________________
Stable:
1973 450sl
1978 red diamond ice vette
1975 steel blue convertable vette
2002 steel blue dakota quad.

if it is like my 123 cars, there is a cover over the end that you grab and flip up. then there is a little bolt that you take out and then it lifts off. that is what i remember. could be faulty memory.

good luck

tom w

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Once the bolt is removed they should come off, chances are yours are stuck some wd 40 and an overnight may work but you will need to pry them up this may take more pressure then you realize.
m

__________________
Martin Ingram
Colorado Springs
2005 320 CDI
2006.5 VW Jetta TDI
1991 560SEL (179000 Sold)
1972 280SEL 4.5 ('The Lead Sled' 320000 miles when sold.)
1972 220D (225000 when sold)