![]() |
81 300CD transmission question
I have an opportunity to buy a 81 300CD that the transmission went out on recently. Can someone give me an idea of the cost (or book time) to R & R the transmission? Provided that I can find one somewhere. This is near Austin, TX if that makes a difference
|
Cost
I've seen it as low as $1200 dollars for just a rebuilt with just soft parts. But if any hard parts, IE servo's, or forks, are bad, then it could go as high as $3000.
Rob |
Transmission
If you're willing to pay a little for shipping and would like a good transmission, try and visit this link, and search for part # RT-722.118B
http://www.adsitco.com/category.asp?CID=1644 They're selling for $1,195.00 I worked with these folks when I had to re-do the tranny on my 190E - very competent, and extremely helpful. I had the dealer put it in, and I remember about $900 in labor (9-10hrs. I believe). Of course, and indy would be slightly less, dependent upon shop rates. You could get by for about $2,300 IMO. |
R & R time should be around 5.5-6 hrs.
I would think you could find a used trans for around $250-400. |
All times are GMT -4. The time now is 04:52 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website