|
|
|
#1
|
|||
|
|||
Fault code 9? (MAS controller)
Hi!
I made a homebrew fault code reader last week.. Plugged it in (socket 14) and got 9 blinks, the analog code table shows that I got a circuit 50 failure.. But what does it mean? Is my MAS controller broke.. Everything else seems to be ok (at socket 3 & 8).(I have a 16-pin connector). I've started to notice a rough idle some weeks ago, my duty cycle fluctuate around 20-30% at idle.. can the MAS have something to do with it? |
#2
|
|||
|
|||
I cleared the fault code memory and now I got 1 blink = ok!
the circuit 50 failure hasnt showed up after that. and now, after I have cleared the memory my dutycycle is around 46-54%...strange! My idle and HC is still not perfect, but that is probably related to some other problems. Shall check the distcap, rotor, coil and wires tomorrow. |
Bookmarks |
|
|