Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-20-2006, 06:27 PM
Registered User
 
Join Date: Jun 2006
Posts: 5
1992 190E Won't start when hot.

This is a new car I just bought so I don't have any history. I determined that the fuel pump cuts out after a couple of seconds starting it when hot so it won't start. I jumpered pins 9 and 7 in the fuel pump relay, now it starts and runs fine. Pin 12 is labelled crank rpm and I have no input from that. Is this the crankshaft position sensor? Does that sound like the problem, and how hard is it to change? Is it under the engine? Any help would be appreciated.
Thanks
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page