|
|
|
#1
|
|||
|
|||
Idle Control 126
What should it cost to replace an Idle Control Module on an 85 380SE? Parts and labor.
|
#2
|
|||
|
|||
Part is 200-300 bucks online, and 10 minutes worth of labor.
__________________
1985 380SE Blue/Blue - 230,000 miles 2012 Subaru Forester 5-speed 2005 Toyota Sienna 2004 Chrysler Sebring convertible 1999 Toyota Tacoma |
#3
|
|||
|
|||
idle control valve
jackmac,
I bought an 85 380SE about 2 months ago. It needs a lot of work but runs and drives. The first thing I did was remove the idle control valve and clean the inside (not the electronic part) with carb cleaner. The unit seemed to perform much better after that. I also cleaned the junk off the air intake with carb cleaner. Good luck. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|