Does anyone know how to replace the ignition tumbler in a 1995 C220? I have the parts but the dealer wants to charge me up to $800 to complete the service. HELP!!!!

I have the HAYNES U.K. manual with the directions, your car dosen't have the electronic key?

they do make a distinction between LOCK CYLINDER & COMPLETE SWITCH ASSEMBLY
sounds like you want just to do LOCK CYLINDER.

they do say you need a special tool (no. 202589001400) and describe how a homemade version can be built - used to depress the circular locking plate around the cylinder lock, while using the ignition key at the same time.

they also describe how once the lock cylinder is removed it must not be turned from position one while the lock cylinder is removed, or the steering lock will be permanently engaged.

if you have the special tool and can verify that the Haynes U.K. manual will work on your car I'll type out the complete instructions.

I have a video on the ignition removal. 99% sure it's for the 202 chassis PM me your email and you can take a look.

__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif
15 VW Passat TDI
00 E420
98 E300 DT
97 E420 Donor Car - NEED PARTS? PM ME!
97 S500
97 E300D
86 Holden Jackaroo Turbo D
86 300SDL
(o\|/o)

thank you my email is only1jackie69@yahoo.com

Does the video show how to remove the tumbler when the key won't turn?

__________________
Auto Zentral Ltd.

Its a normal removal. May get kicked from yahoo its 10 Meg. Most free email services don't accept larger files.

__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif
15 VW Passat TDI
00 E420
98 E300 DT
97 E420 Donor Car - NEED PARTS? PM ME!
97 S500
97 E300D
86 Holden Jackaroo Turbo D
86 300SDL
(o\|/o)