Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-22-2006, 12:16 PM
Registered User
 
Join Date: Oct 2006
Posts: 2
ABS light intermittently on and rough tickover

W124 1991 300D auto 206,000 miles :
Abs light comes on and stays on run it for 10 -15 miles goes out,stop it and same again.when its ticking over engine labours and shakes the car to bits but when lights out its fine

Heard and read about low voltage's will cause light to come on,so when its runnig for 10 miles or so battery is full charged and all ok?? battery is less than 12 months old and charges at 13.7v.is it possible to just change brushs on this type of alternator or is it service ex unit.

wheel sensors...how common are they to failure
tyre pressure's and wear .if they are causing the problem fault it would be there constantly.. so i cant see that being the problem.

wet weather.. water on sensors/cranked sensor.noticed problen has been more or less there since rain

can anyone explain the roughness in engine while light is on

thanks
Rob
Reply With Quote
  #2  
Old 10-22-2006, 12:21 PM
sixto's Avatar
smoke gets in your eyes
 
Join Date: Jun 2000
Location: Eastern TN
Posts: 20,851
If your car has an overvoltage protection relay, and I imagine it does, it could be on its way out. In the LHD version of that car the relay is tucked between the battery and the firewall. Maybe look there first.

The relay looks like this -

http://catalog.eautopartscatalog.com/mercedesshop/sophio/wizard.jsp?partner=mercedesshop&clientid=catalog.mercedesshop&baseurl=http://catalog.peachparts.com/&cookieid=1UF05A51E1XD0QGLZL&year=1991&make=MB&model=300-DT-003&category=All&part=Overload+Relay

Sixto
93 300SD
Reply With Quote
  #3  
Old 10-23-2006, 04:21 PM
Registered User
 
Join Date: Oct 2006
Posts: 2
Smile

found the overvoltage protection relay after much searching..
removed it from car cleaned ,stripped it down ,cleaned the fluff off solder

tested.....no better tap it slightly abs light out engine returns to normal

left it loose in battery box ie on its side tested stationary and light off refit to bracket back on


think new one is needed

thank you
Reply With Quote
  #4  
Old 10-24-2006, 07:08 AM
zcc's Avatar
zcc zcc is offline
Registered User
 
Join Date: Nov 2005
Location: Kuwait
Posts: 610
Arrow

Clean (or change) the ABS sensors on the front wheels. 100% they are causing this problem, I faced it on my 560SEC 1989 W126.
__________________
Master Computer Engineer, A+, Network+, MCP/MCSA/MCSE 4/2k/2k3 - Messaging, MCTS, MCITP, MCT, Brainbench, ICDL and starting Ph.D

380SE 1984 <------- Totaled by flipping accident
300SE 1988 <------- Sold
Volvo S70 2000 <---- 4 family
Opel Omega 2002 <-- 4 family
560SEC 1989 <------ Sold
560SEL 1990 <------ Sold
560SEL 1991 <------ 4 my mother
560SEL 1989 <------ Sold
600SEL 1992 <------ Current


http://search.ebay.com/_W0QQsassZkhazenzcc
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page