Hi,
I looked at same brake pads for W124, but the OE for 1993 has a flat pad, while the OE for 1995 looks like have a cut vertically across the whole pad. Does the cut makes any different ? Which is the right one ? Of if the installer cut it before putting it in ? This one shows the 'center cut' http://img.eautopartscatalog.com/live/0024203720JUR.JPG This one shows the 'flat' brake pad: http://img.eautopartscatalog.com/live/D1320DPBR.JPG |
Should not make any difference. May be a manufacturer thing. I have seen both styles for the same year car. Could also have something to do with pad composition or break-in wear characteristics. Doubt is was done by the installer. Who has the time, and why would they do that anyway?? :confused:
|
I think that there was a post a while back that claimed the center cut helped minimize brake noise.
|
All times are GMT -4. The time now is 01:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website