|
|
|
#1
|
|||
|
|||
1991 300D 115K miles:
I bought my car used, and its been like this since then. At night, when I turn the driving lights on, the dashboard is lighted ok, but there is no light by the gear stick. so I have to feel my way to move the stick to proper position (its an automatic). Is there supposed to be a light there ? and if yes, do I change it by lifting wood trim ? Thanks a bunch Andreas |
#2
|
||||
|
||||
Yes: The wood comes off in a manner similiar to that described in the stereo removal article on early w124 cars, not sure about the later one. The shifter light was discussed in the thread Where is the light for this?
There are a number of other threads under shift light, shift bulb, center console trim, etc. Hope this helps
__________________
John 2003 Firemist Red/grey leather SL 500 2015 Palladium Silver/black mbtex GLK 350 1987 Smoke Silver/burgundy mbtex 300E Sportline (SOLD) Click to see 87 300E |
#3
|
||||
|
||||
I took my bulb out, went to the dealer, and got a new one, took all of 5 minutes ot pop it out and put the new one in.
Of course the dealer could not find the map light bulb for the map light, but then again, I should probably look up the part number myself. hehe Alon
__________________
'92 300CE - Sold 2004 C240 - 744 - C7 Wheels - Android Radio 2002 C320 - 816 - Sport Wagon |
#4
|
|||
|
|||
Amazing... 15 mins (including the trip to the auto store), and $2.70 later, I have light in my mercedes gear stick !
I am ashamed to say that it had been dark for that long ! Thanks you all ! |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem: The oil pressure light stays on | toka | Tech Help | 4 | 11-22-2008 04:44 PM |
722.3/4 trans start gear [ 1st/2nd ?] | Arthur Dalton | Tech Help | 2 | 07-02-2005 06:34 AM |
Euro light differences, 500E vs 300E. | JCE | Tech Help | 16 | 09-20-2004 06:00 PM |
83 240D Manual Trans rebuild--I finished it, but something is wierd about 3 rd Gear.. | Carrameow | Tech Help | 4 | 12-30-2003 12:40 AM |
Fog Light installation in ML. | blau | Tech Help | 5 | 02-12-2001 01:05 PM |