|
|
|
|
|
#1
03-21-2007, 12:42 AM
|
|||
|
|||
|
fuel pump assembly (single to double pump??)
On the W124 platform, some of the earlier models use a single fuel pump assembly underneath instead of two. Is it possible to replace this single-pump assembly with one that uses 2-pumps? ie. is the fuel line and wiring harness etc. compatible?
|
|
#2
03-21-2007, 08:06 AM
|
|||
|
|||
|
Sure...why?
Under most circumstances 1 pump will do!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#3
03-21-2007, 10:12 AM
|
|||
|
|||
|
the cars with only one pump had diff injectors with a lower opening pressure.if you change to double pumps you may need to change them also.which brings it's own set of problems in that the line connections at the injectors may be a diff size.
__________________
David S Poole European Performance Dallas, TX 4696880422 "Fortune favors the prepared mind" 1987 Mercedes Benz 420SEL 1988 Mercedes Benz 300TE (With new evaporator) 2000 Mercedes Benz C280 http://www.w108.org/gallery/albums/A...1159.thumb.jpg
|
 |
| Bookmarks |
|
|
Linear Mode
