300SE Will Not Start?

[gasparetto]

Recently washed the engine compartment (avoided spraying the engine directly) to remove road salt. Didn't start the car after spraying the engine compartment and let the car sit for about a day & a 1/2 in about 35-45 degree temps. When I finally tried to start it it wouldn't. It turns over easily but gives absolutely no indication that it wants to start? I checked for a spark at the coil and a couple of spark plugs and it is getting a nice spark. Removed the distributor cap and both the cap and rotor are in great shape. I sprayed starter fluid into the air intake and it still gave no indication that it wanted to start. I am at a loss?!?!? The Bosch Ingition Control Module is mounted on the drives side wheel housing and I got that wet (had it wet before) as I washed the salt off. It apears to be a completely sealed unit and I can't tell if it is working or not? I have checked all the fuzes to include the 10 amp one in a relay next to the master cylinder. Anyone with some advice?

Details on the car; 1988 300SE 3.0 Liter with 196,000+ miles and most recently replaced the fuel pump.