Help interpreting data:
I went to the DIY section and consulted my PM CD reagrding testing air/fuel mixture with a multimeter. I got results that aren't what I expected. With the O2 sensor disconnected, it started out at 6.5V and the temp indicator on the instrument panel indicated typical operating temperature. After idling for several minutes, I noticed that the ranges were increasing so I unplugged the sensor again and the voltage had risen to 6.92V. The PM cd says it should measure 2.1-4.8V. With the sensor connected, the voltage did oscillate. The range was +1.3V to +1.7V from the 6.92V baseline with the sensor disconnected. |
All times are GMT -4. The time now is 10:35 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website